Examination of radio‐opacity enhancing additives in shape memory polyurethane foams

Three microparticle additives, tungsten (W), zirconium oxide (ZrO₂) , and barium sulfate (BaSO₄) were selected to enhance the radio‐opacity in shape memory polymer (SMP) foam biomaterials. The addition of filler causes no significant alterations of glass transition temperatures, density of the materials increases, pore diameter decreases, and total volume recovery decreases from approximately 70 times in unfilled foams to 20 times (4% W and 10% ZrO₂). The addition of W increases time to recovery; ZrO₂ causes little variation in time to shape recovery; BaSO₄ increases the time to recovery. On a 2.00 mean X‐ray density (mean X.D.) scale, a GDC coil standard has a mean X.D. of 0.62 ; 4% W enhances the mean X.D. to 1.89, 10% ZrO₂ to 1.39 and 4% BaSO₄ to 0.74. Radio‐opacity enhancing additives could be used to produce SMP foams with controlled shape memory kinetics, low density , and enhanced X ‐ray opacity for medical materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42054.     

Single passage in mouse organs enhances the survival and spread of Salmonella enterica

Intravenous inoculation of Salmonella enterica serovar Typhimurium into mice is a prime experimental model of invasive salmonellosis. The use of wild-type isogenic tagged strains (WITS) in this system has revealed that bacteria undergo independent bottlenecks in the liver and spleen before establishing a systemic infection. We recently showed that those bacteria that survived the bottleneck exhibited enhanced growth when transferred to naive mice. In this study, we set out to disentangle the components of this in vivo adaptation by inoculating mice with WITS grown either in vitro or in vivo. We developed an original method to estimate the replication and killing rates of bacteria from experimental data, which involved solving the probability-generating function of a non-homogeneous birth–death–immigration process. This revealed a low initial mortality in bacteria obtained from a donor animal. Next, an analysis of WITS distributions in the livers and spleens of recipient animals indicated that in vivo-passaged bacteria started spreading between organs earlier than in vitro-grown bacteria. These results further our understanding of the influence of passage in a host on the fitness and virulence of Salmonella enterica and represent an advance in the power of investigation on the patterns and mechanisms of host–pathogen interactions.     

Sedentary behaviour and health at work: an investigation of industrial sector,job role,gender and geographical differences

This article presents baseline data from 1120 employees across 10 worksites enrolled in a workplace physical activity intervention. The study provides new data on physical activity, sedentary behaviour, and health and highlights gender, geographical, job type and industrial sector differences. Sitting at work accounted for more than 60% of participants’ total daily sitting time on work days. Weekly and monthly hours worked, body mass index (BMI) and waist circumference were significantly higher for workers in the private sector compared to the public sector. Employees in sales and customer services had significantly higher BMI scores and significantly lower scores for workability index (WAI), job satisfaction, organisational commitment and job motivation, compared to other groups. This study provides further evidence that work is a major contributor to sedentary behaviour and supports the pressing need for interventions particularly targeting private sector industries and sales and customer service sectors.

Practitioner Summary: Work accounts for more than 60% of the daily sitting time. Private sector employees had higher BMIs than those in the public sector and employees in sales and customer services had higher BMIs and poorer health compared to other occupations, suggesting that these groups should be targeted in workplace interventions.     

Modeling the effect of a superabsorbent polymer material as desiccant in maize drying using CFD

Maize is an important foodstuff in many countries, and one of most susceptible crops to mold and aflatoxin contamination, which results in considerable postharvest losses and is a burden to consumers’ health, especially in developing countries. The timely drying of harvested maize is essential to halt mold development, ensuring safe storage. The effect of the incorporation of a superabsorbent polymer (SAP) as desiccant in a maize dryer was studied using computational fluid dynamics simulations which accounted for heat and mass transfer between maize, SAP and air. The adsorption capacity and adsorption rate of a commercial SAP material were experimentally determined at different temperature and relative humidity levels, which served as basis for the adsorption model required in the simulations. A maize bulk with SAP packages distributed in it was modeled. Results showed that the SAP material increases the drying rate substantially, particularly in the upper bulk zone where the air reaching it is dehumidified the most. The maize closer to the upper bulk surface starts drying from the beginning of the process instead of lagging for hours or days before the drying front reaches it. An inconvenience of the SAP material is the tendency of granules to swell and stick together as moisture reaches a threshold, which may reduce its performance. Thus, provided this issue is resolved or minimized, SAP materials could successfully assist the rapid drying of maize and other crops. They may also be used during storage to avoid rewetting of the crops during periods of high relative humidity.     

Nonwoven Ni–NiO/carbon fibers for electrochemical water oxidation

The development of technologically efficient anodes for water oxidation is crucial to improve hydrogen production via water splitting. Electrodes based on metallic active sites dispersed in carbon matrices have been shown to be an attractive way to attain this goal. However, challenges remain to prevent catalyst agglomeration that otherwise can result in a decrease of performance over time.In this work, we report an alternative and efficient method to produce nickel-nickel oxide nanoparticles-embedded in carbon nanofibers (Ni–NiO/C), by the solution blow spinning (SBS) process. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses show the carbon nanofibrillar matrix as a robust support, with well-dispersed nickel nanoparticles on the surface. The responses of the linear scanning voltammetry, cyclic voltammetry and electrochemical impedance spectroscopy demonstrate how a small fraction of nickel on the fiber surface (≈1.2–5.3%) is enough to promote substantial improvement in performance (η = 278 and 309 mV vs RHE for 10 mA cm^?2) and a significant turnover frequency (TOF) values of 1.38 (η = 278) and 1.30 s^?1 (η = 309). These promising results are correlated with a large amount of Ni³⁺ present on the fiber surfaces, as identified by X-ray Photoelectron Spectroscopy (XPS). This work provides a low-cost and rapid preparation technique that can be extended for the manufacture of a wide variety of electrodes based on metals supported on carbon nanofibers.     

Quantitative Physiological Assessment of Stress Via Altered Immune Functioning Following Interaction With Differing Automotive Interface Technologies

Technology can enhance or diminish a user's psycho-physiological stress level; the ability to quantify these responses can help evaluate and refine design. The capability of drivers to accomplish basic tasks utilizing differing sensory modalities while maintaining lane discipline within a computer-simulated environment was assessed. Fifteen healthy subjects provided capillary blood samples before and after using three human–machine interface designs—touch-screen, voice control, and multimodal. Using a chemiluminescent technique termed Leukocyte Coping Capacity, the ability of leukocytes to produce reactive oxygen species in vitro was assessed. Significant poststressor changes in leukocyte activity of varying magnitude were observed following the use of all interfaces; with the multimodal interface provoking the most pronounced response and voice control the least. Although still requiring further research, the results support the proposition for using immune responsiveness as a means for quantifying psychological stress during assessment of ergonomic design and psycho-physiological and social interaction.     

Microglial Cell Activation Increases Saturated and Decreases Monounsaturated Fatty Acid Content,but Both Lipid Species are Proinflammatory

Neuroinflammation is a component of age-related neurodegenerative diseases and cognitive decline. Saturated (SFA) and monounsaturated (MUFA) fatty acids are bioactive molecules that may play different extrinsic and intrinsic roles in neuroinflammation, serving as exogenous ligands for cellular receptors, or endogenous components of cell structural, energetic and signaling pathways. We determined the fatty acyl profile of BV2 microglial cells before and after acute activation with lipopolysaccharide (LPS). We also investigated the effect of SFA and MUFA pretreatment on the production of an invasive, neurotoxic phenotype in BV2 cells. Acute activation of BV2 microglia resulted in an increase in the relative content of SFA (12:0, 16:0, 18:0, 20:0, 22:0, and 24:0 increased significantly), and a relative decrease in the content of MUFA (16:1n7, 18:1n7, 18:1n9, 20:1n9, 24:1n9 decreased significantly). In agreement, the major stearoyl-CoA desaturase (SCD) isoform in BV2 cells, SCD2, was significantly down-regulated by LPS. We next treated cells with SFA (16:0 or 18:0) or MUFA (16:1n7 or 18:1n9), and found that levels of secreted IL6 were increased, as was secreted MMP9-mediated proteolytic activity. To test the functional significance, we treated SH-SY5Y neuronal cells with conditioned medium from BV2 cells pretreated with fatty acids, and found a small but significant induction of cell death. Our findings suggest differential intrinsic roles for SFA and MUFA in activated microglial cells, but similar extrinsic roles for these fatty acid species in inducing activation. Expansion of SFA is important during microglial cell activation, but either supplemental SFA or MUFA may contribute to chronic low-grade neuroinflammation.